Omron F250-UME Software Manual page 867

Normal Serial Interface
6-2-2-9 IMGSAVE: Image Save
Function
CHECK
6-2-2-10 IMGSAVEM: Image Save Memory Card
Function
Output
Command executed correctly:
Command not executed correctly:
Example
This example loads the file "LABEL1.BMP" in the Memory Card 0 directory
DIR01 to memory 2.
Input IMGLOADM 2 /C0/DIR01/LABEL1.BMP Delimiter
Output OK Delimiter
Saves image data to an external device.
Input
For XMODEM transfers: IMGSAVE <Memory number> Delimiter
For ZMODEM transfers: IMGSAVE <Memory number> <Filename> Delimiter
The memory number (0 to 35) specifies the memory location containing the
image data to be saved to the external device.
Output
Command executed correctly:
Command not executed correctly:
The XMODEM (-1K) protocol is not supported.
Example
This example saves the image data contained in memory 2 to the external
device.
Input IMGSAVE 2 Delimiter
Output OK Delimiter
Saves image data to a Memory Card.
Input
IMGSAVEM <Memory number> <Filename> Delimiter
• The memory number (0 to 35) specifies the memory location containing
the image data to be saved to the Memory Card.
• Specify the drive (C0 or C1) at the beginning of the file name.
• Specify the absolute path from the root directory.
• Add the filename extension .BMP to the filename.
Output
Command executed correctly:
Command not executed correctly:
Example
This example saves the image data contained in memory 2 as the file
"LABEL1.BMP" in Memory Card 0 directory DIR01.
Input IMGSAVEM 2 /C0/DIR01/LABEL1.BMP Delimiter
Output OK Delimiter
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
Section 6-2
6-2-(17)