Ec Position Compensation - Omron F250-UME Software Manual

EC Position Compensation

2-6 EC Position Compensation
HELP
The EC Position Compensation processing item finds marks for position dis-
placement compensation using shape information such a "round," "angular,"
etc. This allows position displacement compensation to be performed even if
the section used for position compensation is deformed or chipped.
Position displacement compensation can be performed
even under the following conditions:
Internally
altered
This function can be used for position displacement
compensation of a variety of shapes.
Refer to
Mark used for position displacement
compensation
Chipped Deformed
for information on edge codes (EC).
Section 2-6
Low contrast
2-6-(1)