Omron F250-UME Software Manual page 805

Screen Display and Monitor
Image Status
The Display Settings Screen will be displayed.
System settings
3. Change the settings for each item.
4. Select End.
The settings will be registered and the screen in (2.) will return.
Select the type of itmage to be displayed in the background.
Selection
Through The latest image taken by the Camera is displayed directly.
If measurement is performed using a Through display, the mea-
surement time will be increased by the amount of time from when
the measurement command is input until the image input starts.
This delay is included in the measurement time shown on the
Monitor and Run Mode screens.
Freeze* (before A still of the image taken by the Camera is displayed. This image
scroll) is updated when measurement is performed.
Select Freeze when measuring moving objects.
If position displacement compensation is set, an unscrolled
image is displayed. The region will be scrolled by the position dis-
placement amount.
Freeze (after A still of the image taken by the Camera is displayed. This image
scroll) is updated when measurement is performed.
Select Freeze when measuring moving objects.
If position displacement compensation is set, an image scrolled
the position displacement amount will be displayed.
:
Image status
Freeze(Before scroll)
:
Display image Image0
:
Image size
:
None
Display results
:
Scene/mode
:
Overall judgement
:
Processing time
End
Details
Section 5-3
All
ON
ON
ON
5-(7)