Omron F250-UME Software Manual page 574

Lot Number OCV 1
2-24-(21)
Setting
Position Positioning can be used only when fixed extraction and no 0
suppression are set. Set whether the numbers are left-aligned
or right-aligned when the lot number does not require all of the
digits. (Right*, Left)
Output Set whether or not to output on serial communications the first
candidate lot number.
Output Format:
Example: If the first candidate lot number registered for Unit 1 is
123, the output is as follows: 1,123 DELIMITER
The asterisk (*) indicates the default setting.
Contents
Right
Left
<unit number>,<1st candidate lot No.> DELIMITER
Section 2-24