Table of Contents
Advertisement
Backing Up Data
Precaution
CHECK
Loading Data
4-(22)
5.
Select the drive to which the Memory Card to be used for backup is mount-
ed.
6.
Select Execute.
Do not turn OFF the power or input a RESET signal executing backup.
Data in memory will be destroyed, and the Controller may not operate cor-
rectly the next time it is started.
When the save operation has been completed, the screen in (4.) will return.
Once backup has been completed, two files, bkupdata and bkupprog, will
be created in the root directory of the Memory Card. These files are the
flash memory backup data. Do not change the file names.
The load operation is performed using the Setup Menu.
The Memory Card used to install the F250-UME Application Software is
needed to start the Setup Menu.
1.
Turn OFF the Controller power supply.
2.
Mount the F250-UME to Memory Card slot 0.
3.
Mount the Memory Card with the backup data into Memory Card slot 1.
4.
Turn ON the Controller power supply.
The Setup Menu will be displayed.
Set up
5.
Select Backup data load.
A confirmation message will be displayed.
6.
Select Execute.
Select items
Install
Backup data load
Clear memory
The Backup Data
stored in memory card
will be loaded.
The programs and data
stored at present
are cleared.
Execute
Cancel
Section 4-2
Advertisement
Chapters
Table of Contents
