Omron F250-UME Software Manual page 52

Basic Operations
SeeAlso
HELP
1-(44)
See page 1-(53).
Dilated Model
Example: Dilation by 3
pixels when the boundary
level is set to 3.
Defect Inspection Methods
An image showing the difference between the model image and inspection
image will be converted internally to a binary image. The method for inspect-
ing defects from those binary images is selected here.
• Labeling*
One group of white pixels is detected as one label and one label that
matches the set conditions will be evaluated to determine if it is a defect
or not.
The asterisk (*) indicates the default setting.
• Binary
The total area of the white pixels is evaluated to determine if there are
defects or not.
Eroded Model
Example: Erosion by 3
pixels when the boundary
level is set to 3.
One defect (max. area)
One defect
One defect
Total area of white pixels
Section 1-6