Omron F250-UME Software Manual page 210

Circle Position Compensation
STEP 3: Setting Judgement Conditions
CHECK
2-9-(7)
The Search Region Settings Screen for model 1 will be displayed.
Search region
3. Use the same method as for model 0 and set the search regions for each
model.
Once the search regions have been set for all models, a registration con-
firmation screen will be displayed.
Search region
4. Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
Set the conditions for judging the correlation of the measurement object to the
model. The judgement conditions will be shared by all 4 models.
Set the range between 0 and 100, with 100 for objects that perfectly match the
model. If the correlation is equal to or above the judgement condition set here,
the judgement result will be OK.
Position Compensation Judgement Results and Scrolling
OK: Scroll will be performed.
NG: Scroll will not be performed. The overall judgement will be NG, regardless
of the measurement result.
1. Select Judgement conditions.
Position(Not rotate)
+
ENT:Register ESC:Cancel
Model registration
Search Region
Judgement conditions
Clear
Section 2-9
30,251