Memory Card Operations; Creating Directories - Omron F250-UME Software Manual

Memory Card Operations

4-6 Memory Card Operations
Precaution
4-6-1

Creating Directories

Data settings and measurement images can be saved from the Controller to a
Memory Card. The files on the Memory Card can be copied and the file names
changed. This section explains these operations for Memory Cards.
Turn OFF the power supply to the Memory Card before removing the Memory
Card. If the power is not turned OFF before the Memory Card is removed, the
Memory Card and the Controller may be damaged. Refer to
Directories can be created in the Memory Card and files can be stored in
those directories. It is easier to find files if separate directories are created for
related files.
1. Insert the Memory Card.
2. Display the Basic Screen for Monitor Mode or Run Mode.
0.Scn 0
3. Move the cursor to MON (or RUN) and press the ENT Key.
The mode selections will be displayed.
0.Scn 0
4. Select TOOL.
The tool selections will be displayed.
TOOL
5. Select Memory card.
.
MON
Image 0 freeze
MON
SET
MON
RUN
SYS
TOOL
SAVE
System data
Scn Group data
Scene data
System + Scn Group
Image data
Memory card
Clear images
Clear measurement
Section 4-6
---- ---ms
---- ---ms
4-(33)