Table of Contents
Advertisement
DI Branch
CHECK
2-36-(2)
The DI Branch Settings Screen will be displayed.
1.DI branch
2.
Select the DI input to be used.
Up/Down Keys: Scroll through the DI inputs.
A list of units for the current scene will be displayed.
DI4-0=0000 Destination
3.
Select the branch destination unit.
Up/Down Keys: Scroll through the units.
Set a unit number after the DI branch unit number. If an earlier unit number
is set, the processing may continue in a loop.
The settings will be registered.
1.DI branch
4.
Set the branch destination units for other DI input numbers in the same
way.
DI = 00000
(End processing)
DI = 00001
(End processing)
DI = 00010
(End processing)
DI = 00011
(End processing)
DI = 00100
(End processing)
DI = 00101
(End processing)
DI = 00110
(End processing)
DI = 00111
(End processing)
(End processing)
0.Camera image
1.DI branch
2.Edge position
3.DO judge
4.End
5.Pattern
6.DO judge
DI = 00000
2. Edge position
DI = 00001
(End processing)
DI = 00010
(End processing)
DI = 00011
(End processing)
DI = 00100
(End processing)
DI = 00101
(End processing)
DI = 00110
(End processing)
DI = 00111
(End processing)
Section 2-36
Advertisement
Chapters
Table of Contents
