Omron F250-UME Software Manual page 874

Normal Serial Interface
Function 2
6-2-2-23 SGRLOAD: Scene Group Load
Function
CHECK
6-2-2-24 SGRLOADM: Scene Group Load Memory Card
Function
6-2-(24)
Switches the scene group number.
Input
SCNGROUP <scene group number> Delimiter
Specify a scene group number between 0 and 31.
Output
Command executed correctly:
Command not executed correctly:
Example
This example switches to scene group 2.
Input SCNGROUP 2 Delimiter
Output OK Delimiter
Loads scene group data from an external device.
Input
SGRLOAD <scene group number> Delimiter
Specify a scene group number between 0 and 31.
Output
Command executed correctly:
Command not executed correctly:
The data transfer is performed with XMODEM (-CRC or SUM) or ZMODEM
protocol. (The XMODEM (-1K) protocol is not supported.)
The Controller sends the character string "READY" to the external device
when the Controller has completed preparations. Wait for the "READY" string
to be received at the external device before starting the data transfer.
Example
This example loads the scene group data from the external device to scene
group 2.
Input SGRLOAD 2 Delimiter
Output OK Delimiter
Loads scene group data from a Memory Card.
Input
SGRLOADM <scene group number> <file name> Delimiter
• Specify a scene group number between 0 and 31.
• Specify the drive (C0 or C1) at the beginning of the file name.
• Specify the absolute path from the root directory.
• Add the filename extension .SGR to the filename.
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
Section 6-2