Changing Drives - Omron F250-UME Software Manual

Memory Card Operations
4-6-6

Changing Drives

CHECK
4-(42)
The Controller has two Memory Card slots and the drive name is displayed as
shown below when the list of files is displayed.
System data save
/C1
[. ]
SYSDAT1 SYD
SYSDAT2 SYD
SYSDAT3 SYD
If there are Memory Cards mounted in both slots 0 and 1, use the following
procedure to switch between drives.
1. Press the SHIFT+ESC Keys on the screen where the list of files is dis-
played.
File operation
ENT:Select S+ESC:Edit
The edit menu will be displayed.
2. Select Switch Drive.
The Switch Drive option will not be displayed if only one Memory Card is
mounted in either slot 0 or slot 1.
Switch to the other drive.
File operation
Drive name
Memory Card in slot 0: /C0
00/11/01
00/11/01 Memory Card in slot 1: /C1
00/11/01
00/11/01
/C1
[. ] 00/11/01
SYSDAT1 SYD 00/11/01
SYSDAT2 SYD 00/11/01
SYSDAT3 SYD 00/11/01
BOTTLE SCN 00/11/02
SEAL SCN 00/11/02
Property
Make directory
New file
Change name
Delete
Switch Drive
/C0
[. ] 01/02/01
SCN1 SCN 01/11/01
SCN1 SCN 01/02/01
Section 4-6