Omron F250-UME Software Manual page 922

Normal Serial Interface
Note
CHECK
6-2-(72)
1. The settings for differences in data 41, 57, and 58 are as following when
setting and reading the values.
Data Setting
41 Reflected in the white defect and black
defect differences.
57 Reflected in the white defect difference. The white defect difference is output.
58 Reflected in the black defect difference. The black defect difference is output.
2. If these settings are changed, one rectangular region will be set and any
previously drawn figures will be deleted.
EC Circle Count (Measurement Data)
Data
Measure- 0 Judgement result
ment
-2: Not measured.
data
-1: NG
0: OK
1 Quantity
2 Circle 0
3
4
5
6 Circle 1
7
8
9
to
254 Circle 63
255
256
257
Only the allocations for circle 0 and circle 63 are listed here. Refer to the allo-
cations for circle 0 to calculate the numbers for circles 1 to 62.
The white defect difference is output.
Details
Center X
Center Y
Radius
Circular value
Center X
Center Y
Radius
Circular value
... (Same as for circle 0)
Center X
Center Y
Radius
Circular value
Section 6-2
Reading