Wait - Omron F250-UME Software Manual

Wait

2-32 Wait
The Wait processing item temporarily stops the execution of the flowchart and
holds processing for a set time. The wait time is set in ms.
Example
Measurement at one place
Camera moved
Measurement at another place
0.Scn 0=SET=
0.Camera image
1.Binary defect
2.Wait
3.Camera image
4.EC defect
5.
Once the processing has been
held for the set time, the
processing starts for the next unit.
1. Select Wait.
ENT:Set SFT+ESC:Edit
The Waiting Time Settings screen will be displayed.
2. Set the waiting time to 0 ms or longer (0 to 9999).
3. Select End.
The settings will be registered and the screen in (1.) will return.
Wait processing item used to hold
processing during the time required
0.Scn 0=SET=
0.Camera image
1.Binary defect
2.Wait
3.Camera image
4.EC defect
5.
Waiting time : [
End
Section 2-32
0]ms
2-32-(1)