Omron F250-UME Software Manual page 26

Menu Operations
Registering
Processing
Items to Units
1-(18)
The registration procedure will be explained using the example of registering
binary position compensation, one of the position compensation processing
items. Change the procedure as required to register other processing items.
1. Move the cursor to a free unit number and press the ENT Key.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
The processing item groups will be displayed.
0.Scn 0=SET=
0.Camera image
1.
2. Select Position Compensation.
A list of the installed position compensation processing items will be dis-
played.
0.Scn 0=SET=
0.Camera image
1.
3. Select Binary pos. comp.
Binary position compensation will be set for unit 1 and the next unit number
(unit 2 in this case) will be displayed.
0.Camera image
1.
Input Image
Position Compensation
Measurement
Measurement Support
Branch Control
Results Output
Results Display
Input Image
Position Compensation
Binary pos. comp
Measurement
EC pos. comp
Measurement Support
Edge pos. comp
Branch Control
Model pos. comp
Results Output
Circle pos. comp
Results Display
Reset scroll
0.Scn 0=SET=
0.Camera image
1.Binary pos. comp
2.
Section 1-5