Omron F250-UME Software Manual page 179

Edge Position Compensation
2-7-2 Setting the Position Displacement Compensation Region
1
Set the
edge
detection
conditions.
2-7-2-1 STEP 1: Setting Edge Detection Conditions
The edge is found using density changes within the measurement region.
The direction for edge detection and color change can be set to suit the mea-
surement object.
3
2
Draw the Re-register
region. the
reference
position.
Set the direction for edge detection and the density changes.
Measurement conditions
→
Direction
:
Color
: Light→Dark
End
Example: To detect the following position
Direction:→
Color: Light→Dark
1. Select Position compensation 0 or Position compensation 1.
1.Edge pos. comp
The initial screen for edge position compensation will be displayed.
2. Select Measurement conditions.
(As required)
4
Set the
judgement
conditions.
Edge detection direction: →, ←, ↑, ↓
Density change: Light→Dark, Dark→Light
Measurement image
Position compensation 0
Position compensation 1
Direction
Measurement conditions
Region
Reference registration
Judgement conditions
Detailed conditions
Clear
Section 2-7
(As required)
5
Change the
detailed
settings.
2-7-(3)