Creating Flowcharts - Omron F250-UME Software Manual

Menu Operations
1-5-3

Creating Flowcharts

CHECK
CHECK
SeeAlso
1-(14)
In the Application Software, measurement processing is broken up into differ-
ent processing items to facilitate a variety of applications.
Flowcharts are created using a combination of processing items to suit each
application.
When Set Mode is entered, the number 1 will be displayed below 0.Camera
image. This number is called the unit number. Processing items set for the unit
numbers.
0.Scn 0=SET=
0.Camera image
1.
Unit number
ENT:Set SFT+ESC:Edit
"Camera image" is set for unit 0 as the default processing item.
The processing items are set in order from unit 0.
Once a processing item is set for unit 1, unit 2 will automatically be displayed.
0.Scn 0=SET=
ENT:Set SFT+ESC:Edit
There is no limit to the number of units. Any number of units can be set pro-
vided the Controller has enough free memory.
Refer to SECTION 5 System Settings for information on how to check the
remaining free work memory (main memory) space.
0.Camera image
1.EC pos. comp
2.
Section 1-5