Omron F250-UME Software Manual page 486

QUEST Character Verification
2-21-(17)
If the character string contains asterisks (*), underscores (_), or question
marks (?), set the reference value for the density deviation to evaluate these
symbols as spaces or symbols.
Symbol
,
:
[ 0: 30]%
:
[ 30: 70]%
: [ 70:100]%
.
: [10]tone
End
The measurement value for density deviation can be checked under the
detailed results display on the measurement screen.
The asterisk (*) indicates the default setting.
1. Select Symbol.
Character conditions
The Symbol Settings Screen will be displayed.
Symbol
2. Set the range for each symbol to be recognized.
3. Select End.
The settings will be registered and the screen in (1.) will return.
Comma ( ) position
0% to 100% (0:30*)
Dash (-) position:
0% to 100% (30:70*)
Period (.) position:
0% to 100% (70:100*)
Density deviation to evaluate asterisks (
underscores (_), and question marks (?) in
character strings as spaces or symbols:
0 to 127 (10*)
If the density deviation is lower than the
setting, it will be evaluated as a space.
Font
Symbol
Date
K B - 6 5 7 6 2
Slender character
0 1 . 1 1. 0 7
,
:
[ 0: 30]%
:
[ 30: 70]%
: [ 70:100]%
.
: [10]tone
End
Section 2-21
,
*
),