Drawing A Region - Omron F250-UME Software Manual

Menu Operations
1-5-4

Drawing a Region

Measurement
region selection
Box
The whole
region moves.
Ellipse
The whole
region moves.
Circle
The whole
region moves.
Circumference
The whole
region moves.
Polygon
Specify the
first point.
1-(24)
Use the following method to draw model regions and measurement regions.
The region figures that can be drawn depend on the processing item. Refer to
the explanation for each processing item for information on what figures can
be drawn.
Move the cursor with the Up, Down, Left, and Right Keys. Use these keys
together with the SHIFT Key to move the cursor quickly. Press the ENT Key at
the desired positions and press the ESC Key to undo the setting.
The lower right
coordinates move.
ENT
ESC
The lower right
coordinates move.
ENT
ESC
The diameter
changes.
ENT
ESC
The circumference
changes.
ENT
ESC
Specify the
second point.
ENT
ESC
Drawing method
ENT
The figure is set.
ENT
The figure is set.
ENT
The figure is set.
The width changes.
ENT
ESC
Specify the third
and other points.
ENT
ENT
Press the ENT
ESC
(Up to 10 points
Key twice.
can be specified.)
Section 1-5
ENT
The figure is set.
The figure is set.