Omron F250-UME Software Manual page 802

Camera Settings
CHECK
SeeAlso
Precaution
5-(4)
4. Select End.
The settings will be registered and the System Settings Screen will return.
If Others is selected under Camera, the Camera Settings (Detail) Screen
will be displayed.
The settings for F200/F300 Cameras are listed in the Setup Manual.
Refer to the Setup Manual.
Camera settings(Detail)
When changing the Camera model, save settings data in flash memory.
Set the measurement conditions after starting the Controller again.
Camera Speed
: Double
Shutter
: SYNC
Synchronization
: External
: [
Strobe disable, start
: [
Strobe disable, end
:
Clamp pulse timing [ 80]CLK
: [ 25]CLK
Clamp pulse width
: [
Shutter trigger width
↑ ↓
End
Section 5-2
RESET
0]H
0]H
3]H