Omron F250-UME Software Manual page 597

Labeling
2-25-7 Setting the Coordinate Mode
Coordinate mode
Output coordinate:
After scroll
Calibration
End
The asterisk (*) indicates the default setting.
CHECK
Select the type of coordinates.
Before scroll: Output made using the coordinate values
After scroll*: Output made using the coordinate values
: OFF
ON : Output made using coordinate values set using calibration.
OFF*: Output made using Camera coordinate values.
If the coordinate mode is changed after the judgement conditions have been
set, the measurement results will change also. Change the judgement condi-
tions to enable correct measurement.
1. Select Coordinate mode.
The Coordinate Mode Settings Screen will be displayed.
Coordinate mode
2. Make the settings for each item.
3. Select End.
The settings will be registered and the screen in (1.) will return.
before position displacement compensation.
after position displacement compensation.
SeeAlso
Output Coordinates: Refer to
for differences between output coordinates.
Measurement image
Binary
Measurement conditions
Region
Reference registration
Judgement conditions
Coordinate mode
Output coordinate :
After scroll
Calibration : OFF
End
Section 2-25
2-25-(14)