Table of Contents
Advertisement
Inputting Camera Images
CHECK
2-1-(3)
The point measured by the Controller becomes the specified point for calibra-
tion, giving a higher degree of accuracy than when using Point specification.
1.
Select Camera settings.
0.Camera image
The initial Camera Settings Screen will be displayed.
2.
Select calibration for the camera number to be used.
The initial Calibration Screen will be displayed.
Calibration(Camera0)
Sampling input
Specifying point
Specifying coordinate axis
Parameter input
Reference parameter
3.
Select Sampling.
4.
Select Model registration.
Camera settings
Select camera
Filtering order(Image0)
Filtering(Image0)
BGS levels(Image0)
Filtering order(Image1)
Filtering(Image1)
BGS levels(Image1)
Frame/Field
Camera settings
Shutter speed(Cam0)
Light control(Cam0)
Calibration(Cam0)
Shutter speed(Cam1)
Light control(Cam1)
Calibration(Cam1)
Shutter speed(Cam2)
Light control(Cam2)
Model registration
Sampling
Section 2-1
Advertisement
Chapters
Table of Contents
