Table of Contents
Advertisement
Display Measurement
STEP 2: Setting Display Conditions
CHECK
6.
Press the ESC Key.
The settings will be registered and the screen in (1.) will return.
Set the conditions for display. The font cannot be specified. The display font
will be the same as the menu font.
Conditions
Font size
: Normal
Color
: Normal
Reverse
:
OFF
Digits of integer
: [ 8]
Digits of decimal
: [ 3]
End
No. of display digits:
Integer: 0 to 8 (8*)
Decimal: 0 to 3 (3*)
*The asterisk (*) indicates the default setting.
The font colors can be changed. Refer to
When Color is set to Normal and the characters have been displayed on the
screen once, they will continue to be displayed whether or not Display Mea-
sure has been executed as one of the branching control processing items.
1.
Select Conditions.
4.Display measure
The Conditions Settings Screen will be displayed.
2.
Make the settings for each item.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Size
Large: Twice the height and width of Normal
Normal*: Same size as menu font (Normal)
Small: 1/2 the height and width of Normal
Color
Normal:*White
OK color:Green
NG color:Red
Reverse
OFF*
ON
Measurement
Conditions
Position
Conditions
Font size
: Normal
Color
: Normal
Reverse
:
OFF
Digits of integer
: [ 8]
Digits of decimal
: [ 3]
End
Section 2-44
.
2-44-(3)
Advertisement
Chapters
Table of Contents
