Omron F250-UME Software Manual page 364

EC Defect
2-15-5 Setting Inspection Regions
Inspection method
Defect
Labeling
Gravity and area
2-15-(31)
There are 3 inspection methods available for selection.
Up to 8 regions can be set and separate inspection methods can be chosen
for each region.
Detects line defects for the removal image produced from the settings for removal
regions 0 to 7. Only the 2 parallel lines in the edge-extracted image are detected as
defects.
Original image
Line defect
Performs labeling on the removal image produced from the settings for removal
regions 0 to 7. The number of defects and the size of each defect can be found.
Original image
Defects
Performs gravity and area processing on the removal image produced from the set-
tings for removal regions 0 to 7. The total white pixel area can be found.
Original image
Defects
Details
Removal image
Circle
removed
Removal image
Circle
removed
1 label
Removal image
Circle
removed
Finds total area
Section 2-15
Inspection
region
1 label
Inspection
region
Inspection
region