Table of Contents
Advertisement
Edge Position
STEP 4: Setting Judgement Conditions
CHECK
3.
Press the ENT Key.
The setting will be registered and the screen in (1.) will return.
Set the position ranges for an OK judgement.
Judgement conditions
Position X :
[
0.000 :
Position Y :
[
0.000 :
Measurement results for displayed image
Position X and Position Y will change depending on the settings under Mea-
surement/Direction.
The X coordinate is set when ← and → are selected.
Y
The origin and coordinate system are determined by the calibration settings.
1.
Select Judgement conditions.
Region0
The Judgement Conditions Settings Screen will be displayed.
Judgement conditions
2.
Change the settings.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
95.000
511.000
]
95.000
511.000 ]
End
X
The Y coordinate is set when ↑ and ↓ are selected.
Measurement conditions
Region
Reference registration
Judgement conditions
Detailed conditions
Clear
Position X:
95.000
[
0.000 :
511.000
Position Y:
95.000
[
0.000 :
511.000 ]
End
Section 2-17
Range for an OK judgement
Range for X coordinates
(-9,999.999 to 9,999.999)
Range for Y coordinates
(-9,999.999 to 9,999.999)
]
2-17-(8)
Advertisement
Chapters
Table of Contents
