Table of Contents
Advertisement
Setting Conditions for Saving Measurement Images
5-5-2
Clearing All Stored Images
CHECK
5-(30)
All images are automatically cleared when the power is turned OFF, but the
images can also be cleared without turning OFF the power by using the follow-
ing procedure.
1.
Display the Basic Screen in Monitor or Run Modes.
0.Scn 0
2.
Move the cursor to MON (or RUN) and press the ENT Key.
The mode selections will be displayed.
0.Scn 0
3.
Select TOOL.
The data selections will be displayed.
TOOL
4.
Select Clear image.
A confirmation message will be displayed.
5.
Select Execute.
The stored images will be cleared and the screen in (3.) will return.
Change the Console Key allocations to clear the stored images with a one-
touch key operation. Refer to
MON
Image 0 freeze
MON
SET
MON
RUN
SYS
TOOL
SAVE
System data
Scn Group data
Scene data
System + Scn Group
Image data
Memory card
Clear images
Clear measurement
All of stored images
will be cleard.
Execute
Cancel
Section 5-5
---- ---ms
---- ---ms
.
Advertisement
Chapters
Table of Contents
