Omron F250-UME Software Manual page 54

Basic Operations
SeeAlso
1-6-3-3 Registering Models
CHECK
CHECK
Screen size
512 pixels
Registration range:
(6,6) to (505,477)
1-(46)
The Labeling Conditions Settings Screen will be displayed.
Labeling
Refer to page 1-(26) for information on inputting values.
2. Change the settings.
3. Select End.
The settings will be registered and the screen in (1.) will return.
An image of an acceptable product is registered as the model. The image of
the measurement object read by the Camera is compared with this model and
defects are detected where there are differences from the model.
The image stored to Image 0 is used as the measurement image for Fine
Matching.
The model registration range is (6,6) to (505,477).
If pre-processing (filtering) is set for the measurement image, the range that
can be registered will be reduced further.
484
pixels
Area :
[ 0.000 : 247808.000 ]
Sort :
Area descending order
Label No. :[ 0]
End
™
Filter size of 5
-
2 pixels
Registration range:
(8,8) to (503,475)
Section 1-6
Filter size of 3
5
-
1 pixel
Registration range:
(7,7) to (504,476)
™
3