Table of Contents
Advertisement
Binary Position Compensation
CHECK
STEP 2: Drawing Regions
SeeAlso
STEP 3: Re-registering Reference Values
SeeAlso
STEP 4: Setting the Judgement Conditions
CHECK
Judgement conditions
Area
: 2035.000
[
2000.000 :
247808.000]
Gravity X :
180.000
[
0.000 :
511.000]
Gravity Y :
250.000
[
0.000 :
483.000]
Axis angle :
75.000
[ -180.000 : 180.000]
End
: Measurement results for the displayed image
Use these values as a reference for setting upper and lower limits.
6.
Select OK.
The settings will be registered and the screen in (2.) will return.
It is also possible to set the binary level so that measurement is performed
only for an intermediate density range.
When a measurement region is drawn, measurement is performed for the dis-
played image and the results are registered as the reference values (area,
center of gravity, and axis angle). This position becomes the reference position
for position compensation, so be sure to place the measurement object in the
correct position before drawing the measurement region.
The settings method is the same as for Gravity and area.
Refer to page 2-5-(7).
This operation is performed when only the reference values are to be re-regis-
tered.
When a measurement region is drawn, the measurement is performed for the
displayed image and the results are registered as the reference values. If the
re-registering function explained here is used, only the reference values for the
image currently displayed will be registered. The area, center of gravity, and
axis angle are registered for the reference values.
The settings method is the same as for Gravity and area.
Refer to page 2-5-(9).
Make settings for the area, center of gravity, and axis angle.
Position Compensation Judgement Results and Scrolling
OK: Scroll will be performed.
NG: Scroll will not be performed. The overall judgement will be NG, regard-
less of the measurement result.
Range for an OK judgement
Area range (0 to 9,999,999.999)
Range of movement of the measurement object
in the X direction (-9,999.999 to 9,999.999)
Range of movement of the measurement object
in the Y direction (-9,999.999 to 9,999.999)
Rotation range of the measurement object (-180.000 to 180.000,
but only values between -90.000 and 90.000 will be output.)
Section 2-5
2-5-(14)
Advertisement
Chapters
Table of Contents
