Omron F250-UME Software Manual page 941

Normal Serial Interface
Edge Pitch (Settings Data)
Data
Settings 31 Measurement image
data
0: Image 0
1: Image 1
32 Coordinate mode
0: Calibration OFF
1: Calibration OFF
33 Number of edges upper limit (0 to 255)
34 Number of edges lower limit (0 to 255)
35 Pitch upper limit (0 to 9,999.999)
36 Pitch lower limit (0 to 9,999.999)
37 Width upper limit (0 to 9,999.999)
38 Width lower limit (0 to 9,999.999
39 Region upper left X (0 to 511)
40 Region upper left Y (0 to 483)
41 Region lower right X (0 to 511)
42 Region lower right Y (0 to483)
43 Target color
0: White
1: Black
44 Edge level (0 to 100)
45 Minimum level (0 to 255)
46 Mode
0: Normal
1: Fine
Density Data (Measurement Data)
Data
Measure- 0 Judgement result
ment
-2: Not measured.
data
-1: NG
0: OK
1 Density average
2 Density deviation
3 Reference average
4 Reference deviation
5 Difference average
6 Difference deviation
Section 6-2
Details
6-2-(91)