Omron F250-UME Software Manual page 375

EC Defect
SeeAlso
CHECK
Example
Input image
Inspection region
When a White-pixel Section Encroaches on the Inspected Region
Input image
Not recognized as start point because change from white to black.
Measuring Open-form Measurement Objects
The measurement result changes depending on the orientation of the measurement
object.
Input image
Defect Display
Select the method for displaying defects on the measurement screen (where
regions are displayed separately).
Refer to page 2-16-(20).
Simple
A display cursor will appear at the defect position. This is the default setting.
When there are defects at multiple positions, the display cursor will appear at
the center of gravity of the total white pixel area and may not, therefore, appear
exactly at the defect position.
Section 2-15
Fill profile: ON
Fill profile: ON
Fill profile: ON
Defect
2-15-(42)