Omron F250-UME Software Manual page 807

Screen Display and Monitor
0.Scn 0=SET=
0.Camera image
1.EC pos. comp
2.Fine matching
3.Switch camera
4.Binary defect
0.Scn 0=SET=
0.Camera image
1.EC pos. comp
2.Fine matching
3.Switch camera
4.Binary defect
5.Switch camera
6.Fine matching
7.Switch camera
8.Fine matching
CHECK
Display Results
CHECK
None (default)
CHECK
Example: When Camera Image Set to 1 and Switch Camera Set to 1
Example: When Camera Image Set to 1 and Switch Camera Set to 3
Light brightness cannot be displayed for reduced images.
Detailed measurement results can be displayed on the screen. Judgement
conditions can also be set while monitoring measurement values.
The description given here is based on default key allocations. Be careful if the
key allocations have been changed.
Only the overall judgement will be displayed.
0.Scn 0
If the image size is set to All and the Camera image or Switch camera settings
in the image input-related processing items are set to 2 or more, use the Up
and Down Keys to switch between images.
Image 0 freeze0
0. Image from 3. Image from
Camera image Switch camera
0. Image from
Camera image
5. Image from
Switch camera
NG 67ms
MON
Image 0 freeze
Indicates the position of the image input
processing item in the list of items.
Section 5-3
3. Image from
Switch camera
7. Image from
Switch camera
5-(9)