Omron F250-UME Software Manual page 540

ECM Search
Gravity
2-23-(13)
1. Select Search coordinates.
1.ECM search
The registration methods will be displayed.
2. Select Manual.
A cursor will appear at the center of the model.
Manual
3. Use the Up/Down/Left/Right Keys to change the position if required.
4. Press the ENT Key.
The search coordinates will be registered and the screen in (1.) will return.
The image will be converted to binary and the center of gravity of the white
pixel area in the model rectangle will be set as the search coordinates.
1. Select Search coordinate.
1.ECM search
Measurement image
Extract edges
Measurement conditions
Model registration
Search coordinate
Search region
Judgement conditions
Detailed conditions
Coordinate mode
Manual
Gravity
Edge
Search coordinates
Measurement image
Extract edges
Measurement conditions
Model registration
Search coordinate
Search region
Judgement conditions
Detailed conditions
Coordinate mode
Section 2-23
214,235