Omron F250-UME Software Manual page 77

Inputting Camera Images
The Model Registration Settings Screen will be displayed.
Model registration
5. Circumscribe one figure with a box and register the model image to be
used for sampling.
The screen for selecting the reference position settings for the model will
be displayed.
Reference position
6. Select Manual or Gravity.
Manual: Any reference position can be set.
Gravity: The image is converted to binary and the center of gravity is set
as the reference position.
When Manual is selected, the Reference Position Settings Screen will be
displayed. A display cursor will appear at the center of the model, as the
default position.
When Gravity is selected, the Gravity Settings Screen will be displayed.
7. Set the reference position.
Manual:
Use the Up/Down and Right/Left Keys to move the cursor to the reference
position and press the ENT Key.
Reference position
Manual
Gravity
Reference position
Section 2-1
310,130
+
+
384,162
+
2-1-(4)