Table of Contents
Advertisement
Binary Position Compensation
2-5-1
Selecting the Measurement Image
This section describes how to select an image stored at either Image 0 or
Image 1 as the image for measurement.
1.
Select Binary pos. comp.
0.Scn 0=SET=
0.Camera image
1.Binary pos. comp
2.
ENT:Set SFT+ESC:Edit
The initial Binary Position Compensation Screen will be displayed.
2.
Select Measurement image.
The selections will be displayed.
Measurement image
Image0
image1
3.
Select which image will be used for measurement, the image stored at Im-
age 0 or the image stored at Image 1.
4.
Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
Measurement image
Position compensation 0
Position compensation 1
Direction
Section 2-5
2-5-(2)
Advertisement
Chapters
Table of Contents
