Omron F250-UME Software Manual page 875

Normal Serial Interface
6-2-2-25 SGRSAVE: Scene Group Save
Function
CHECK
6-2-2-26 SGRSAVEM: Scene Group Save Memory Card
Function
Output
Command executed correctly:
Command not executed correctly:
Example
This example loads the file "LABEL.SGR" to scene group 2 from Memory Card
0 directory DIR01.
Input SGRLOADM 2 /C0/DIR01/LABEL.SGR Delimiter
Output OK Delimiter
Saves scene group data to an external device.
Input
For XMODEM transfer: SGRSAVE <scene group number> Delimiter
For ZMODEM transfer: SGRSAVE <scene group number> <filename> Delim-
iter
Specify a scene group number between 0 and 31.
Output
Command executed correctly:
Command not executed correctly:
The XMODEM (-1K) protocol is not supported.
Example
This example saves the scene group data of scene group 2 to the external
device.
Input SGRSAVE 2 Delimiter
Output OK Delimiter
Saves scene group data to a Memory Card.
Input
SGRSAVEM <scene group number> <file name> Delimiter
• Specify a scene group number between 0 and 31.
• Specify the drive (C0 or C1) at the beginning of the file name.
• Specify the absolute path from the root directory.
• Add the filename extension .SGR to the filename.
Output
Command executed correctly:
Command not executed correctly:
Example
This example saves the scene group data of scene group 2 as file
"LABEL.SGR" in Memory Card 0 directory DIR01.
Input SGRSAVEM 2 /C0/DIR01/LABEL.SGR Delimiter
Output OK Delimiter
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
Section 6-2
6-2-(25)