Table of Contents
Advertisement
Trend Monitor
Graph
CHECK
SeeAlso
2-34-(6)
The Parameter and Graph setting method selections will be displayed.
2.
Select Parameter.
The Parameter Judgement Conditions Settings Screen will be displayed.
Judgement conditions(Parameter)
3.
Set the judgement and warning conditions.
4.
Select End.
The settings will be registered and the screen in (1.) will return.
Move lines on the graph to set the upper and lower judgement limits and the
warning range.
Actual measurements can be executed and the measurement values dis-
played on a graph to be used as a guide when setting lines here.
Refer to page 2-34-(8).
1.
Select Judgement conditions.
3.Trend monitor
The Parameter and Graph setting method selections will be displayed.
2.
Select Graph.
Parameter
Graph
Limits of judgement :
[
346.500:
Limits of warning
:
[
365.750:
End
Measurement
Judgement conditions
Display range
Detailed conditions
NG display
Save data
Parameter
Graph
Section 2-34
423.500]
404.250]
Advertisement
Chapters
Table of Contents
