Omron F250-UME Software Manual page 726

Display Measurement
STEP 3: Setting Display Position
2-44-(4)
Set the position for character display. The size of the display region shown on
the screen is the same as the actual size when the measurement is displayed.
Use this as a reference for deciding positions.
Care must be taken because characters in any part of the display region that
protrudes past the right edge of the screen will not be displayed.
1. Select Position.
4.Display measure
The cursor for setting position and the display region will be displayed.
Position
2. Use the Up/Down and Right/Left Keys to move the display region.
3. Press the ENT Key to set the position.
The settings will be registered and the screen in (1.) will return.
Measurement
Conditions
Position
Display region
Section 2-44
(10,13)