Omron F250-UME Software Manual page 856

Normal Serial Interface
Controller Settings for RS-232C and RS-422 Connections
Serial Communications
6-2-(6)
Use the following procedure to set communications specifications such as the
baud rate and data length. Set the same communications specifications in the
Controller and the external device.
1. Move the cursor to MON or RUN and press the ENT Key.
0.Scn 0
2. Select SYS.
The System settings menu will be displayed.
System settings
3. Select Communications.
The communications menu will be displayed.
System settings
4. Select Serial.
MON
SET
MON
RUN
SYS
TOOL
SAVE
Image 0 freeze
Camera settings
Communication
Display
Operation settings
Measurement control
Startup mode
Date/Time
System information
Camera settings
Communication
Serial
Display
Normal
Operation settings
Host link
Measurement control
Parallel
Startup mode
Ethernet
Date/Time
System information
Section 6-2
---- ---ms