Omron F250-UME Software Manual page 610

Edge Pitch
2-27-2 Setting the Edge Detection Conditions
2-27-(4)
Set the conditions for the edge search.
Measurement conditions
Target color
Mode
End
1. Select Measurement conditions.
The Measurement Conditions Settings Screen will be displayed.
Measurement conditions
2. Select the edge detection conditions.
3. Select End.
The settings will be registered and the screen in (1.) will return.
Color to be counted: White or black
: White
: Normal
Normal: Use when the pin width
and pitch are 2 pixels or more.
Fine: Use to stably detect the
number of pins for smaller widths
and pitches than for Normal.
Measurement image
Measurement conditions
Region
Judgement conditions
Detailed conditions
Coordinate mode
Target color : White
Mode : Normal
End
Section 2-27