Omron F250-UME Software Manual page 369

EC Defect
CHECK
switched to. If a NG image is shown, display the removal image and adjust
the binary level.
Binary level
Edge image
Switch image
4. Move the cursor to the upper limit and press the Left and Right Keys to
change the value.
Right Key:
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
SHIFT+Left Keys:
Up and Down Keys: Switches between setting items.
Binary level
Edge image
:Move
Auto
The Controller
automatically
determines
binary level.
5. Use the same method to change the lower value.
Set the upper and lower limits to make the measurement object white.
6. Select OK.
The settings will be registered and the screen in (2.) will return.
Upper [255]
Image
[128]
Lower
switched.
Reverse
Auto
OK
Increases the lowest digit by one.
Decreases the lowest digit by one.
Decreases the value 10 times faster.
Lower limit
Upper
Lower
Reverse
Switch image
:Change
Switch image
Switches between edge-
extracted and removal images.
Reverse
Reverses black and white display.
Binary level
Edge image
Switch image
Section 2-15
Binary level
Removal image
Upper
Lower
Reverse
Switch image
Upper limit
[255]
[128]
Auto
OK
[255]
Upper
[128]
Lower
Reverse
Auto
OK
2-15-(36)
[255]
[128]
Auto
OK