Omron F250-UME Software Manual page 308

Density Defects
2-14-(10)
1. Select Reference registration.
Region0(Defect(Line))
Measurement conditions
Inspected region
Reference registration
Judgement conditions
Detailed conditions
Clear
A display cursor will appear at the position where a large defect was found.
Reference registration
Measurement region
ENT:Set
2. Use the Up/Down/Left/Right Keys to move the cursor to change the ref-
erence position.
3. Press the ENT Key.
A display cursor will appear at the position where a small defect was found.
Reference registration
ENT:Set
4. Use the Up/Down/Left/Right Keys to move the cursor to change the ref-
erence position and Press the ENT Key.
The settings will be registered and the screen in (1.) will return.
Reference position for large defect
251,184
:Move
Reference position for small defect
251,200
:Move
Section 2-14