Omron F250-UME Software Manual page 451

Table of Contents

Advertisement

EC Circle Count
2-19-8
Setting the Coordinate Mode
Coordinate mode
Output coordinate:
After scroll
Calibration
End
The asterisk (*) indicates the default setting.
Select the type of coordinate values if the center coordinates of circles are to
be output.
Before scroll:Output made using the coordinate values
After scroll*: Output made using the coordinate values
Refer to
output coordinates.
: OFF
ON:
OFF*: Output made using Camera coordinate values.
1.
Select Coordinate mode.
1.EC circle count
The Coordinate Mode Settings Screen will be displayed.
Coordinate mode
2.
Make the settings for each item.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
before position displacement compensation.
after position displacement compensation.
for differences between
Output made using coordinate values set using calibration.
Measurement image
Extract edges
Measurement conditions
Inspected region
Candidate radius
Judgement conditions
Detailed conditions
Coordinate mode
Output coordinate:
After scroll
Calibration
: OFF
End
Section 2-19
2-19-(16)

Advertisement

Table of Contents
loading

Table of Contents