Table of Contents
Advertisement
Label Data
2-26-3
Setting the Judgement Conditions
2-26-(6)
Set the judgement conditions for the label data that was obtained (area and
center of gravity).
Judgement conditions
Area
:
2035.000
[
0.000: 247808.000 ]
Gravity X : 26.000
[
0.000:
511.000]
Gravity Y : 157.000
[ 0.000:
483.000]
End
The measurement results for the displayed image
Use these values as references in setting the upper and lower limits.
1.
Select Judgement conditions.
2.Label data
A screen to input the judgement conditions will be displayed.
Judgement conditions
2.
Set the judgement conditions.
3.
Select End.
The settings will be registered and the screen in (1.) will return.
Ranges for an OK judgement
Area range for specified label number
(0 to 9,999,999.999)
X direction movement range for specified
label number (0 to 9,999,999.999)
Y direction movement range for specified
label number (0 to 9,999,999.999)
Label unit
Label No.
Judgement conditions
Coordinate mode
Area
:
2035.000
[
0.000: 247808.000 ]
Gravity X : 26.000
[
0.000:
511.000]
Gravity Y : 157.000
[ 0.000:
483.000]
End
Section 2-26
Advertisement
Chapters
Table of Contents
