Omron F250-UME Software Manual page 182

Edge Position Compensation
2-7-2-4 STEP 4: Setting Judgement Conditions
CHECK
CHECK
2-7-(6)
2. To change the position, use the Up/Down and Right/Left Keys to move
the cursor.
3. Press the ENT Key.
The setting will be registered and the screen in (1.) will return.
Set the position ranges for an OK judgement.
Position Compensation Judgement Results and Scrolling
OK: Scroll will be performed.
NG: Scroll will not be performed. The overall judgement will be NG, regardless
of the measurement result.
Judgement conditions
Position X :
[ 0.000 :
Position Y :
[ 0.000 :
End
Measurement results for displayed image
Position X and Position Y will change depending on the settings under Mea-
surement/Direction.
X
The Y coordinate is set when ↑ and ↓ are selected.
The X coordinate is set when ← and → are selected.
Y
The origin and coordinate system are determined by the calibration settings.
1. Select Judgement conditions.
Position compensation 0
Clear
Range for an OK judgement
95.000
511.000 ]
Range for X coordinates
(-9,999.999 to 9,999.999)
95.000
511.000 ] Range for Y coordinates
(-9,999.999 to 9,999.999)
Measurement conditions
Region
Reference registration
Judgement conditions
Detailed conditions
Section 2-7