Omron F250-UME Software Manual page 484

QUEST Character Verification
2-21-3 Setting Character Conditions
Operational Flow
1
Select font.
STEP 1: Selecting Fonts
Font
Printer :
IJP font :
Laser font :
Stamp font :
End
2-21-(15)
(As required)
2
Define
symbol
position.
Select the font for the characters to be verified.
If the font is unknown, change IJP font, laser font, and stamp font settings to
All.
Printer type:
IJP* (ink jet printer), Laser (laser printer), or stamp
IJP
All
All
All
Laser printer fonts:
All*, Gothic, OCRA, OCRB, SEMI
Stamp fonts:
All*, Gothic, Ming-style, OCRA, OCRB
Note: KGK: Kishu Giken Kogyo
The asterisk (*) indicates the default setting.
3 (As required) 4
Set date.
Ink jet printer font sizes and manufacturer:
All*, 5 dot (Common), 5 dot (Hitachi), 5 dot (Marconi), 5
dot (Domino), 5 dot (Linx), 5 dot (Willet), 5 dot (Imaje), 5
dot (KGK (see note))
7 dot (Common), 7 dot (Hitachi), 7 dot (Marconi), 7 dot
(Domino), 7 dot (Linx), 7 dot (Willet), 7 dot (Imaje), 7 dot
(KGK (see note)), 7 dot (EDM)
9 to 12 dot, Over 14 dot.
Section 2-21
(As required)
For slender
characters.