Table of Contents
Advertisement
EC Defect
CHECK
CHECK
SeeAlso
This setting will be enabled only if Frame/Field under Camera image is set to
Frame. If set to Field, the effect will remain the same as if 5
even if 3
3 is selected.
The greater the mask size, the more the variations in surrounding pixels can
be absorbed. Select 5
This function is even more effective if smoothing is used.
Refer to
ing can be set to be executed twice).
Select 3
3 to detect small defects or burrs. If 5
might be absorbed as uneven edges and defects may not be detected.
1.
Select Extract edges.
1.EC defect
™
Example: Select 3
3
Information from the surrounding 9 pixels is
used to determine whether or not the
center pixel is the edge. (1 square = 1 pixel)
5 to ignore uneven edges.
and
Measurement image
Extract edges
Removal regions
Removal image
Inspected regions
Coordinate mode
Section 2-15
5 is selected
(where smooth-
5 is selected, the edges
2-15-(6)
Advertisement
Chapters
Table of Contents
