Binary Position Compensation - Omron F250-UME Software Manual

Binary Position Compensation

2-5 Binary Position Compensation
Operational Flow
1
page 2-5-(2)
Select the
measure-
ment image.
Gravity and area page 2-5-(3)
2
page 2-5-(3)
1
Set the position
Set the
displacement
binary
compensation
region.
level.
Gravity and axis page 2-5-(12)
1
Set the
binary
level.
3
page 2-5-(16)
Set the dis-
placement
direction.
4
page 2-5-(18)
Measure-
ment
screens
2-5-(1)
The Binary Position Compensation processing item is used to convert an
image to binary, find the center of gravity of the measurement object, and
detect the position compensation amount.
Binary position compensation can be performed even for measurement
objects that are at an angle.
The image read by the Camera is a 256-gradation image. This is converted to
a binary image made up of black and white pixels. The center of gravity of the
white area is used to perform position compensation.
2 (As required)
Use the fill
profile
function.
2
Draw the
region.
Center of gravity
3 4
(As required)
Draw the Re-register
the
region.
reference
values.
(As required)
3 4
Re-register Set the
reference judgement
values. conditions.
Section 2-5
5 6
(As required)
Set the Change
judgement pixel
conditions. skipping.
(As required)
5
Change
pixel
skipping.