Table of Contents
Advertisement
Lot Number OCV 1
CHECK
CHECK
1.
Select Binary.
Extract conditions
The settings screen for binary levels will be displayed.
Binary level
:Move
Auto
The Controller automatically
sets the binary level.
2.
Move the cursor to the upper limit and use the Left and Right Keys to
change the value.
Right Key:
SHIFT+Right Keys: Increases the value 10 times faster.
Left Key:
SHIFT+Left Keys:
Up and Down Keys: Switches between setting items.
3.
Use the same method to change the lower value.
Set the upper and lower limits so that the numbers are displayed as white
pixels.
4.
Select OK.
The settings will be registered and the screen in (1.) will return.
It is also possible to set the binary level so that measurement is performed
only for an intermediate density range.
Compensate image
Shading
Binary
Extract method
Dilate level
Noise conditions
Lower limit
Upper[255]
Lower[128]
Reverse
:Change
Reverse
Reverses white or black in
the display.
Increases the lowest digit by one.
Decreases the lowest digit by one.
Decreases the value 10 times faster.
Binary level
:Move
:Change
Section 2-24
Upper limit
Auto
OK
Upper[255]
Lower[128]
Reverse
Auto
OK
2-24-(8)
Advertisement
Chapters
Table of Contents
