Omron F250-UME Software Manual page 953

Normal Serial Interface
Function 2
SeeAlso
6-2-2-32 UNITDAT2
Function 1
Function 2
Sets the parameters for the unit set to the current scene.
Input
UNITDATA <unit No.> <data> <parameter>Delimiter
• Specify a unit number between 0 and 9,999.
• The data will depend on the processing item for the specified unit.
Refer to
Output
Command executed correctly:
Command not executed correctly:
Example
In this example, the model position upper left X coordinate for region 0 for pat-
tern inspection is set to 100.
Input UNITDATA 5 516 100 Delimiter
Output OK Delimiter
Reads the character string for QUEST character verification.
Input
UNITDAT2 <unit No.> <data> Delimiter
• Specify a unit number between 0 and 9,999.
• For information on data, refer to
Output
Command executed correctly:
Command not executed correctly:
Example
This example shows how to read the inspection character string for QUEST
character verification.
Input UNITDAT2 7 979 Delimiter
Output AAA Delimiter
OK Delimiter
Sets character string for QUEST character verification.
Input
UNITDAT2 <unit No.> <data> <character string> Delimiter
• Specify a unit number between 0 and 9,999.
• For information on data, refer to
Output
Command executed correctly:
Command not executed correctly:
.
OK Delimiter
ER Delimiter
Value
OK Delimiter
ER Delimiter
OK Delimiter
ER Delimiter
Section 6-2
.
.
6-2-(103)