Turning Off The Power Supply To The Memory Card - Omron F250-UME Software Manual

Memory Card Operations
4-6-7

Turning OFF the Power Supply to the Memory Card

CHECK
SeeAlso
CHECK
Turn OFF the power supply to the Memory Card before removing the Memory
Card. If the power is not turned OFF before the Memory Card is removed, the
Memory Card and the Controller may be damaged.
The total space and free space on the Memory Card will be displayed on this
screen.
1. Perform steps 1 to 5 for Creating Directories and display the Copy file/File
operation/Drive status Menu.
Refer to
2. Select Drive status.
The Drive Status Screen will be displayed.
Drive status
3. If a Memory Card is inserted, "Inserted" will be displayed. Change the dis-
play to Stop.
If a Memory Card is not inserted, the display will be "Not inserted."
4. Select End.
A confirmation message will be displayed.
5. Remove the Memory Card and press the ENT Key.
The screen in (2.) will return.
.
Copy file
File operation
Drive status
Drive C0 : Inserted
Inserted
Free space: B/62436KB
Stop
Drive C1 :
Free space: 24650B/62436KB
End
Memory card C0
can be removed safely.
Push ENT after remove it.
OK
Section 4-6
4-(43)