Omron F250-UME Software Manual page 656

Set Unit Data
2-33-2 Setting the Replacement Details
SeeAlso
2-33-(3)
Set an expression for the data to be replaced.
1. Select Data.
2.Set unit data
The Expression Settings Screen will be displayed.
Data
Measurement:
2. Place the cursor in the square brackets and press the ENT Key.
The list of setting items will be displayed.
Data
ENT:Select
3. Select the desired items and write the expression.
Refer to
4. Once the expression has been set, select OK.
The expression will be saved and the second screen in (1.) will return.
Data
Measurement : 126.312
5. Press the ESC Key.
The settings will be registered and the first screen in (1.) will return.
Data no.
Data
ENT:Change
Unit ABS SIN
MOD COS
MAX ANGL
MIN ATAN
SQRT DIST
Const
DEL BS
.
U1.R00X
Section 2-33
AND
OR
NOT
OK